RyansAutomotive.ie

Mahle OzonePro Ozone Generator

469.00 ex. VAT

Mahle OzonePro Ozone Generator
Please Enquire for Quantity Deals

For your vehicle, Hotel room, classroom, bar, etc.

17 in stock (can be backordered)

Product Description

Mahle OzonePro Ozone Generator

OzonePRO is the professional sanitising system for your workshop to be used in vehicles, offices, hotel rooms, etc.
For you and your customers’ health!

OzonePRO is the professional sanitising system that your workshop should include as part of its maintenance service.

Declare war on viruses, also in your workshop!
Mahle OzonePRO offers an intelligent procedure for consistent results, as the sanitising process is entirely guided by the special software: through the sensor, it analyses the concentration rate of the gas fed into the vehicle interior until the ideal threshold is reached, maintaining its level throughout the time needed for sterilisation to be achieved, through a specific strategy based on the type of vehicle and its inner condition.
The system also eliminates bad odour caused by bacteria, fungi and moulds lurking in the vehicle interior

  •  Easy to use
  •  Fully automatic
  •  Safe (To be used with care and attention) Please follow all instructions with the unit.
  •  100% environment-friendly
  •  Report with service outcome
  •  For car/truck/bus interiors
  • To sanitize your workplace, Hotel room, Office, Bar. Any room up to 500sq ft can be sanitised in 65 minutes
  • APP Controlled (Apple and Google Play Store)
  • 12 volt power supply with cigarette lighter adaptor
  • 5000 mg/h
  • 30,000 Hour life cycle
  • Sanitization times circa Car = 20 mins, Light Commercial = 45 minutes, Bus = up to 2 hours.
  • Not to be used in the presence of people or animals. Please follow all guidelines.

Why is sanitation of the driver’s compartment so important?
Viruses, bacteria and moulds can lurk in upholstery and A/C circuit of any vehicles entering your workshop. For your safety, and for the safety of your employees and customers, a thorough sanitation of the vehicle interior is recommended and more valid than ever before.
OZONE (O3), widely used to disinfect sanitary facilities, makes viruses that may be found on surfaces inert, while sterilizing the vehicle interior to remove moulds and bacteria
Recognized as a natural disinfectant, Ozone offers a wide range of applications: its sanitizing action can be applied to air, water, surfaces and fabrics

Why choose Ozone?
Ozone is a natural gas, widely used in sanitary facilities due to its ability to oxidize and disrupt the molecular structure of bacteria, fungi and viruses.
Every single molecule of Ozone (O3) is generated in nature through electric discharge: by separating some molecules of Oxygen (O2) into single molecules of atomic Oxygen (O1), a new 3-atom molecule can be formed.
The new molecule is actually short-lived: in fact, Ozone decays rapidly, breaking down into oxygen just a few minutes later.
OzonePRO from MAHLE applies the same technology to its own processes.
Through Corona Effect ceramic plates, Ozone is generated and pushed into the environment, according to the sanitizing procedure parameters. This technology allows us to generate large quantities of ozone in a short time. This helps to reach the required level of saturation rapidly, thus greatly increasing efficiency compared to other existing systems.

The Sensor
The special built-in sensor plays a key role. By analysing several environmental parameters, it enables the software to only maintain saturation as long as necessary to ensure elimination of pathogens, while adapting operation to the detected parameters, thus avoiding any oxidation damage inside the vehicle or in the treated environment.

It can be used at any time
The system is made up of a high-capacity (5,000 mg/h) portable Ozone Generator, integrated with the exclusive Multifunction Sensor, at the core of the system, which analyses, calculates and guides all the sanitizing operations.
Extremely handy, it can be used inside the vehicle cabin, thanks to the specific 12V socket to be connected to the cigarette lighter socket

Setting a time is not enough!
Every environment has different requirements of how long and with how much ozone it should be handled, depending on the specific volume of air, temperature and humidity, interiors’ composition and level of cleaning. Time should only be considered once the proper saturation level has been reached in the environment.
This task is handled by the special Multifunction Sensor, which in fact controls every step of the sanitizing process based on the evolution of the vehicle’s environmental and internal parameters.
Control over the sanitizing procedure ensured by OzonePRO prevents all those circumstances that may jeopardize the final result: excessive ozone persistence, failure to reach proper saturation or inadequate saturation times.

Smart operation guaranteed by MAHLE
Just press Start and it will do the rest,
Adding OzonePRO as part of your work routine is super simple.
Just place it inside the environment to be sanitized, press Start and the device will do the rest, informing you when the process is complete and the area sanitized and safe

Connected to the other MAHLE devices.
No waste of time in your workshop. For this reason, OzonePRO is equipped with Bluetooth®, for connection to all the other MAHLE devices in your workshop: TechPRO® diagnostics and ArcticPRO® ACX AC stations range.
Directly through their interface, you will be able to activate software operating synergies, thus enhancing the efficiency of sanitation.

O3-Easy, your dedicated App.
Just like all the other devices from Mahle Aftermarket, OzonePRO has its own App, allowing to manage the device and monitor its processes remotely: 03-Easy.

Sanitation Report.
At the end of the process, the Sanitation Report can be sent or printed, and given to your customer, thus giving value to the excellent service you are providing

Mahle OzonePro
Download The Mahle OzonePro Flyer

Developed and manufactured by Mahle Click here to learn more about Mahle

We also recommend using a Atom machine with purifying treatment after this process to leave a nice fresh smell in the vehicle before handing back to the customer
Click here for more info on the Atom machine

Product Specifications

Weight 4 kg
Dimensions 60 × 40 × 40 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

If you want to ask a pre-sale question about this product, please feel free to use the form below.


Your First Name (required)

Your Phone (required)

Your Last Name (required)

Your Email (required)

Your Question

[bwsgooglecaptcha bwsgooglecaptcha-671]