RyansAutomotive.ie

Sale!

Autoland iSCAN 3e Diagnostic System 2 years updates

1,950.002,950.00 ex. VAT

Autoland iSCAN 3e Diagnostic System 2 years updates

2,250.00 1,950.00 ex. VAT

4 in stock (can be backordered)

2,450.00 2,250.00 ex. VAT

5 in stock (can be backordered)

2,950.00 ex. VAT

Available on back-order

Product Description

autoland scientech,
                                                          Autoland Scientech iSCAN 3e (also known as iSCAN SF in the US)

About Autoland Scientech
Autoland Scientech has been manufacturing quality automotive diagnostic equipment for over 20 years. With headquarters in Japan, Taiwan and Singapore, Mexico, USA and Europe.

Autoland is a manufacturer of many well known scan tools such as iScan, iScan II, iScan II wt, iScan 3, e-iSCAN, VeDiS, VeDiS II, VeDis 3 and DOL. Autoland started out producing engine analyzers as its primary focus. In the early 90s along with the inception of OBD Autoland was the first one to design an aftermarket handheld device that could diagnose Mercedes Benz vehicles.
Autoland has always strived to provide not only quality Diagnostics but affordable Diagnostics and innovative solutions for diagnostics. Autoland was the first aftermarket company to provide the ability to share with others the power of accessing diagnostic software for over 40 brands (Now over 60) paying a low cost license subscription.
top_20_2010

Autoland Scientech products were selected as one of Motor Magazine’s Top 20 Tools in 1999 and again in 2010

 

iSCAN 3e

The iSCAN 3e is the latest model from Autoland Scientech
This new unit is based on the Vedis 3 and has the exact same multi brand coverage as the Vedis 3 and it is also based on the same operating system and has the same software layout and general multibrand diagnostic functions

The main differences from the Vedis 3 are:

  • Hardware is a little different, has 2 handles on the sides, and a fold prop for tool to stand, and some other minor hardware changes
  • And iSCAN 3e can now also have some the software’s like retrofits + conversions, coding and programming and IMS, these software’s were previously only available on the iSCAN 3 before this

This tool is available in 3 different software versions:

  • iSCAN 3e start version = multibrand diagnostic software and service functions
  • iSCAN 3e standard version = multibrand diagnostic software, service functions, retrofits and conversions
  • iSCAN 3e pro version = multibrand diagnostic software, service functions, retrofits + conversions, coding and programming (we dont stock this version as the cost for this version is very similar to the price of the iSCAN 3 which has all the same features and a bigger screen so its better to go for the iSCAN 3 instead)

(see below for more details on the retrofits + conversions and coding and programming features)

When purchasing initially you pick the version the suits your needs at the time, but the good thing is you can upgrade the software at any time later, contact us for more information on upgrade cost

This unit combines all the latest features you would expect in a modern diagnostic tool with Autolands world renowned diagnostic software 

Features / Main Functions (all 3 versions)

  • Fault code read and clear
  • Current Data numerical and graphing
  • Actuation test
  • System Identification (ECU number)
  • Adaptation and coding dependent on vehicle and system
  • Printable Customer Relationship manager
  • J2534 compatible
  • Superior boot up and Connection Speed for Fast Service
  • Vehicle and Module auto detection(on most makes and models)
  • Built-in remote control and support availability via team viewer
  • Wireless internet connection for software updates and browsing the internet
  • Browse online for fault code/repair  information by just clicking on the fault code
  • Wireless printing capability
  • 8 inch IPS High Resolution Touch Screen
  • External memory storage compatibility
  • Continuous Software Updates via the internet
  • over 60 brands listed in the software
  • Used everyday in our own diagnostic workshop

Multibrand capabilities (all 3 versions)
Here is a brief list of the systems that can be diagnosed with the i-SCAN 3e

  • Engine electronics
  • ABS/ Traction control/ESP
  • Airbag
  • Transmission control
  • Immobilizer
  • A/C system
  • Suspension electronics
  • Instrument panel
  • Service reset
  • EPS
  • EPB
  • TPMS
  • Radio
  • Parking assistance
  • Auxiliary heating
  • CAN network
  • Body computer
  • Plus many other systems

As well as providing the normal diagnostic functions the range can also complete a huge amount of special functions such as

  • Particulate filter regeneration/replacement and settings
  • Common rail injector coding
  • Common rail IMV/SCV/DRV valves learning
  • Key coding (on some makes and models)
  • Electronic brake caliper functions
  • Service resets
  • Steering angle calibration
  • TPMS programming
  • Control Unit coding
  • and many other special functions

The  i-SCAN 3e gives you the best Asian coverage on the market today and also has near dealer level coverage on the following vehicles—Porsche, Volvo, Mercedes Benz, Ford, Land Rover and BMW and superb coverage on most others

Vehicle Coverage (all 3 versions)

  • Asian Vehicles: Acura, Chevrolet, Daewoo, Daihatsu, Formosa, Greatwall, Holden, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Nissan GTR,  Perodua, Proton, Scion, Ssangyong, Subaru, Suzuki, Toyota
  • European Vehicles: Alfa-Romeo, Audi, Bentley, BMW, Citroen, Fiat, Ford, Jaguar, Lancia, Landrover, Maybach, Maserati, Mercedes-Benz, Mini, Opel, Peugeot, Porsche, Renault, Rools Royce, Saab, Seat, Skoda, Smart, Vauxhall, Volkswagen, Volvo
  • USA Vehicles: Buick, Chevrolet, Chrysler, Dodge, Ford, GM, GMC, Jeep, Oldsmobile, Pontiac, Saturn,
  • Super Cars: Ferrari, lamborghini, Nissan GTR and Maserati
  • Asian Trucks: Dyna, UD, Isuzu, Hino, Mitsubishi/Fuso

 

OTHER FEATURES (all 3 versions)

OEM capabilities with the J2534 function
The Vedis 3 has also has J2534 capability . What this means is if you have a subscription / software for the below OEMs and have it installed on your own laptop you can use the Vedis 3 as an interface between your laptop and your vehicle.

iSCAN IIwt IMSHere is a list of the brands that its is J2534 compatible with

  • Ford FMP/ETIS software function
  • Honda = HDS
  • Jaguar and Land Rover = SDD
  • Mazda = MMP
  • Toyota and Lexus = Techstream
  • Opel/Vauxhall and Chevrolet = GDS and SPS (not tech 2 win)
  • Subaru = SSM4
  • Volvo = Vida

Super car package: (all 3 versions)
The Vedis 3 is one of the few tools on the market to have diagnostic coverage for the following super cars

  • Lamborghini
  • Ferrari
  • GTR
  • Maserati

Asian Truck Package (all 3 versions)
Also one of the few tools to cover Asian light trucks such as,

  • Dyna
  • Fuso
  • Hino
  • Isuzu
  • UD

Retrofits and Conversions (iSCAN 3e standard version and pro version)
Example of some of the settings that can be done depending on make and model, has coverage for the most popular settings, more coming with each update

  • Remote control mirror fold
  • ECO start stop
  • Change seat belt reminder warning
  • Windows remote control
  • Enable DVD/TV while driving
  • AC settings
  • Follow me home lighting
  • Enable day time running lights
  • And much more for the Following brands BMW, Mercedes, Porsche, Ford, Landrover, Mini, VW and Audi

Programming And Coding (iSCAN 3e pro version)
Also on the iScan 3e pro version you can perform programming, coding / encoding for the following brands on a huge range of models and systems. More brands and systems to follow soon.

  • BMW, approx 2004 on wards not MOST BUS systems
  • Ford some models and some systems 2005 on wards
  • Land rover some models and some systems approx. 2007 on wards
  • Mazda some models and some systems 2005 on wards
  • Mercedes some models and some systems
  • Porsche, some models engine electronics only at the moment

Included in the iSCAN 3e Kit

  • Two years updates
  • i-SCAN 3e base unit
  • J2534 application
  • Carry case
  • Main cable
  • OBD-II 16 pin adapter
  • USB cable
  • Mains power supply
  • Quick start guide

Optional extras :

  • Pre 16 pin connections
  • Extra Training and Training on using OE software’s with the J2534 application
  • IMS interface module simulation OEM capabilities with the IMS function (also know as OE simulation box) The iSCAN 3e can have this very special built-in feature called IMS which stands for Interface Module Simulation. What this means is if you have a subscription / software for the below OEMs and have it installed on your own laptop you can use the iSCAN 3 as an interface between your laptop and your vehicle.iSCAN IIwt IMSHere is a list of the OEM interfaces that the iScan II wt can simulate
    This is not just J2534 capabilities its simulating the official interface

    • ICOM and NEXT A for BMW and Mini brands
    • Star C4 / SD connect for Mercedes and Smart brands
    • Piwis2 for Porsche
    • VAS 5054A and VAS 5055 for Audi, Seat, Skoda and VW

    The IMS function can be added at any time, contact us for pricing on the IMS

Please do not hesitate to contact us if you require further information or to arrange a demo.

Ask about our trade-in deals on certain multi brand diagnostic tools.

Additional Information

Weight 8 kg
Dimensions 57 × 43 × 16 cm

If you want to ask a pre-sale question about this product, please feel free to use the form below.


Your First Name (required)

Your Phone (required)

Your Last Name (required)

Your Email (required)

Your Question

[bwsgooglecaptcha bwsgooglecaptcha-671]

If you want to book a demo for this product, either in our garage or at a venue convenient to you, please complete the following form.


Your Name (required)

Your Email (required)

Company/Business Name

Your Phone (required)

Additional Message

[bwsgooglecaptcha bwsgooglecaptcha-170]

The videos below are the Vedis 3 being used and shown but the software and vehicle coverage is the same on the new iSCAN 3e, so you can watch these videos to get a feel for the software and the layout

The main differences is the iSCAN 3e no longer has the touch buttons on the side and now only on the touch screen, and the iSCAN 3e has 2 handles on the side instead of on the bottom and the iSCAN 3e also has a fold prop for the tool to stand
And iSCAN 3e can now also have some the software’s like retrofits + conversions, coding and programming and IMS, these software’s were previously only available on the iSCAN 3 before this

Check out our you tube channel to see more videos on this product
Click here to see our you tube channel

General
We at Ryan’s automotive pride ourselves on the support we give with the products we sell,
As we believe that selling the product to the customer is only the 1st step and that ongoing support is very important so the customer can get good value from his equipment,
We are also in a great position to support these products as we use them every day in our own workshop,
Support and after sales service can sometimes be a very loosely used terms and it is not always clear what the supplier is committing to, this is why we want to explain as clearly as possible what both parties are committing to.
All of the below is based on units sold in Ireland (32 counties) and for outside Ireland it is not possible to provide all of the below support and after sales in the same forms, for example loaner units calling on site etc, so please enquire for more information if you are based outside of Ireland.

Warranty
All Autolands diagnostic tools come with 2 year warranty
And all warranty repairs if required will be either carried out on site or the unit picked up and taken back to Ryan’s Automotive for repairs and a loaner unit will be left with the user until the unit is delivered back. In the cases where we would get a courier to pick up the unit we would ask the workshop to pack up the unit carefully to avoid damage in transport,
We aim to keep the customer up and running and will either have the issue fixed or a loaner unit delivered to the customer within 48 hours (Monday to Friday).

Items excluded from the 2 year warranty are
Main cable and OBD connections,
Damage to the machine caused by incorrect power supply, Excessive dampness, or any other damage caused by fluid ingress, accidental damages, incorrect use damages or unauthorized modifications.

Delivery and Training
Ryan’s Automotive or a courier will deliver the unit to your workshop registered and updated and ready to work,
And spend 2 hours onsite (or if not possible to call onsite can provide training over team viewer and phone) providing training on use of the machine.
We also can provide extra chargeable training if required.

Support
Ryan’s Automotive can provide tool and software technical support by phone, WhatsApp, our customer support portal, email or by logging into your unit via team viewer when needed (subject to fair use and subject to having the software on the latest version).
We also have a support section on our website which has videos and information on how to use and update the unit and also has some common vehicle diagnostic procedures and known problems, users can also send us tickets via this support area.
Additional support packages are required for J2534 OEM packages,
Additional support packages are required for vehicle technical support.

Not included in the support
Technical information that is found on systems like Autodata, Alldata etc,
The above support does not include vehicle technical support but we are always willing to help customers were we can.

Repairs not covered by the warranty and after the warranty period
For repairs not covered by warranty or after the warranty we can assist in few different ways all at very reasonable rates,
1 Log into the unit via team viewer
2 Call on site and perform the necessary work and if needed take the unit back to Ryan’s Automotive for completion
3 Owner can deliverer the machine to Ryan’s Automotive to be repaired (this will save on call out or transportation fees)
4 Arrange to get the unit picked up and taken back to Ryan’s Automotive
5 Send out the necessary parts to the owner and advise over the phone how to perform the necessary operation
6 Provide a hire unit for the period that the unit is out of action (note this is chargeable for non warranty repairs and subject to availability)

Spare parts and optional connectors
We keep a stock of the following parts if required
Main cable
16 pin OBD connector
Mains charger
USB cable
LAN cable
Pre 16 pin connectors